Retrieving logical drive information from controller /dev/cciss/c0d0
Number of logical volumes (00 00 00 08) : 1
Controller /dev/cciss/c0d0 reports 1 logical drives
Logical drive 0 found on controller /dev/cciss/c0d0
Event code 1/5/1
at 7-19-2005 15:27:48
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 7-19-2005 15:28:40
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 7-19-2005 15:29:04
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 7-21-2005 15:11:07
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 8-1-2005 10:02:27
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 8-1-2005 10:08:38
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 8-1-2005 10:09:10
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 10-19-2005 15:22:36
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 2-2-2006 15:43:58
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 2-2-2006 15:49:01
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 2-2-2006 15:49:38
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 2-2-2006 16:01:08
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 2-2-2006 16:02:35
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 2-9-2006 15:59:19
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 2-10-2006 09:48:11
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/0
at 3-7-2006 10:59:09
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 4-5-2006 09:36:49
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 4-5-2006 09:37:47
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 4-5-2006 09:58:28
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 1/5/0
at 6-9-2006 10:58:20
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 0

Event code 1/5/1
at 6-9-2006 10:58:56
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 0

Event code 4/0/0
at 6-22-2006 16:46:10
with message: Physical drive failure: SCSI port 2 ID 0
physical drive 7 has failed with failurecode 7.
this drive is part of a logical drive

Event code 5/0/0
at 6-22-2006 16:46:10
with message: State change, logical drive 0
logical drive 0, changed from state 0 to 3
state 0: Logical drive is ok
state 3: Logical drive is using interim recovery mode

Event code 5/0/0
with message: State change, logical drive 0
logical drive 0, changed from state 3 to 4
state 3: Logical drive is using interim recovery mode
state 4: Logical drive is ready for recovery operation

Event code 5/0/0
with message: State change, logical drive 0
logical drive 0, changed from state 4 to 5
state 4: Logical drive is ready for recovery operation
state 5: Logical drive is is currently recovering

Event code 5/0/0
at 7-10-2006 07:37:11
with message: State change, logical drive 0
logical drive 0, changed from state 5 to 0
state 5: Logical drive is is currently recovering
state 0: Logical drive is ok

Event code 1/5/1
at 7-17-2006 08:59:11
with message: Hot-plug Non-disk device inserted: SCSI port 1 ID 2

Event code 1/5/0
at 10-20-2006 10:39:48
with message: Hot-plug Non-disk device removed: SCSI port 1 ID 2

Event code 5/0/0
at 4-30-2007 17:41:45
with message: State change, logical drive 1
logical drive 1, changed from state 2 to 0
state 2: Logical drive is not configured
state 0: Logical drive is ok

Event code 5/0/0
at 4-30-2007 17:43:45
with message: State change, logical drive 1
logical drive 1, changed from state 0 to 2
state 0: Logical drive is ok
state 2: Logical drive is not configured

Event code 0/0/0
with message: No events to report.

Logical drive 0 on controller /dev/cciss/c0d0 has state 0
OK Arrayprobe All controllers ok